HCT541 Octal Buffers and Line Drivers with 3 State Outputs IC

HCT541 Octal Buffers and Line Drivers with 3 State Outputs IC

The HCT541 octal buffers and line drivers are designed to  have  the  performance  of  the  popular  ’HC240series devices and to offer a pinout with inputs and outputs  on  opposite  sides  of  the  package.  This arrangement   greatly   facilitates   printed   circuit board layout. The 3-state control gate is a 2-input NOR. If either output-enable (OE1 or OE2) input is high, all eight outputs  are  in  the  high-impedance  state.  The’HCT541 devices provide true data at the outputs.

DNA solutions, Nashik has various types of IC's. Check out our complete collection of  IC's.

• Operating Voltage Range of 4.5 V to 5.5 V
  

• High-Current 3-State Outputs Interface Directly With System Bus or Can Drive Up To 15 LSTTL Loads
  

• Low Power Consumption, 80-μA Max ICC
  

• Typical tpd= 12 nsD±6-mA Output Drive at 5 V
  

• Low Input Current of 1 μA Max
  

• Inputs Are TTL-Voltage Compatible
  

• Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)
  

Specifications of HCT541 Octal Buffers and Line Drivers with 3 State Outputs IC

• Number of Channels: 8 independent buffer channels.
  

• Operating Voltage: VCC: 4.5V to 5.5V (typically 5V).
  

• Input Voltage (VI): Accepts TTL-compatible input signals.
  

• Output Current: High-Level Output Current (IOH): -6 mA.
  

• Propagation Delay: Typically around 12 ns at 5V.
  

Package Includes

• 1 x HCT541 Octal Buffers and Line Drivers with 3 State Outputs IC